IP Multicast VLAN Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 42-9
-> vlan svlan 1/49 network-port
-> vlan ipmvlan 1033 sender-port port 1/49
The following command removes the port configured as sender port:
-> no vlan ipmvlan 1003 sender-port port 1/50
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaipmvVlanPortTable
alaipmvVlanPortIPMVlanNumber
alaipmvVlanPortPortNumber
alaipmvVlanPortPortType
alaipmvVlanPortRowStatus
show vlan ipmvlan port-config Displays the sender and receiver ports for a specific IP Multicast VLAN
or all the IP Multicast VLANs.
To Next Page
Loading...
