IP Multicast VLAN Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 42-11
The following commands configure the receiver port in the VLAN Stacking mode:
-> vlan svlan port 1/1 user-customer-port default-svlan 10
-> vlan ipmvlan 1002 receiver-port port 1/1
-> no vlan ipmvlan 1002 receiver-port port 1/1
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaipmvVlanPortTable
alaipmvVlanPortIPMVlanNumber
alaipmvVlanPortPortNumber
alaipmvVlanPortPortType
alaipmvVlanPortRowStatus
show vlan ipmvlan port-config Displays the sender and receiver ports for a specific IP Multicast VLAN
or all the configured IP Multicast VLANs.
To Next Page
Loading...
