Switch Logging Commands
page 45-2 OmniSwitch 6250 CLI Reference Guide November 2009
swlog
Enables or disables switch logging. Switch logging allows you to view a history of various switch
activities in a text format.
swlog
no swlog
Syntax Definitions
N/A
Defaults
By default, switch logging is enabled.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> swlog
-> no swlog
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
systemSwitchLoggingGroup
systemSwitchLoggingEnable
swlog appid level Defines the level at which switch logging information will be filtered for
the specified application.
swlog output Enables or disables switch logging output to the console, file, or data
socket.
show log swlog Displays stored switch logging information from flash.
show swlog Displays switch logging information.
To Next Page
Loading...
