SNMP Commands
page 10-16 OmniSwitch 6250 CLI Reference Guide November 2009
snmpInTraps = 0
snmpOutTraps = 0
From RFC2572
snmpUnknownSecurityModels = 0
snmpInvalidMsgs = 0
snmpUnknownPDUHandlers = 0
From RFC2573
snmpUnavailableContexts = 0
snmpUnknownContexts = 1
From RFC2574
usmStatsUnsupportedSecLevels = 0
usmStatsNotInTimeWindows = 1
usmStatsUnknownUserNames = 1
usmStatsUnknownEngineIDs = 0
usmStatsWrongDigests = 0
usmStatsDecryptionErrors = 0
Release History
Release 6.6.1; command was introduced.
Related Commands
N/A
output definitions
From RFCxxxx Displays the RFC number that defines the SNMP MIB objects listed.
MIB Objects Name of the MIB object listed as an SNMP statistic.
= (integer) The number of times the MIB object has been reported to the SNMP
management station since the last reset.
To Next Page
Loading...
