Distributed Spanning Tree Commands
page 16-92 OmniSwitch 6250 CLI Reference Guide November 2009
Examples
-> bridge mode flat
-> bridge 1x1 255 7/24 connection noptp
-> bridge mode 1x1
-> bridge 1x1 200 2/2 connection noptp
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
vStpInsPortTable
vStpInsPortNumber
vStpInsPortAdminConnectionType
vStpInsPortOperConnectionType
bridge mode Selects the Spanning Tree operating mode (flat or 1x1) for the switch
bridge slot/port connection Implicit command for configuring the Spanning Tree connection type
for a port or an aggregate of ports for the CIST instance or for a VLAN
instance.
bridge cist slot/port admin-edge Configures the administrative edge port status for a port or aggregate
of ports for the CIST instance.
bridge cist slot/port auto-edge Configures whether or not Spanning Tree automatically determines the
operational edge status of a port or an aggregate of ports for the flat
mode CIST instance.
To Next Page
Loading...
