Distributed Spanning Tree Commands
page 16-106 OmniSwitch 6250 CLI Reference Guide November 2009
Examples
-> bridge mode flat
-> bridge cist 15 restricted-tcn on
-> bridge cist 8/23 restricted-tcn disable
-> bridge mode 1x1
-> bridge cist 2/2 restricted-tcn enable
-> bridge cist 10 restricted-tcn off
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
vStpInsPortTable
vStpInsPortNumber
vStpInsPortRestrictedTcn
bridge mode Selects the Spanning Tree operating mode (flat or 1x1) for the switch.
bridge 1x1 slot/port restricted-
tcn
Configures the restricted TCN status for a port or an aggregate of ports
for the specified 1x1 mode VLAN instance.
To Next Page
Loading...
