Distributed Spanning Tree Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 16-137
Examples
-> bridge mode flat
-> show spantree ports
Bridge Port Oper Status Path Cost Role
------+-----+------------+---------+-----
1 1/1 FORW 19 ROOT
1 1/2 DIS 0 DIS
1 1/3 DIS 0 DIS
1 1/4 DIS 0 DIS
1 1/5 DIS 0 DIS
1 1/6 DIS 0 DIS
1 1/7 DIS 0 DIS
1 1/8 DIS 0 DIS
1 1/9 DIS 0 DIS
1 1/10 DIS 0 DIS
1 1/11 DIS 0 DIS
1 1/12 DIS 0 DIS
-> show spantree 1 ports
Spanning Tree Port Summary
Oper Path Desig Prim. Op Op
Port St Cost Cost Role Port Cnx Edg Desig Bridge ID
-----+----+-------+-------+----+-----+---+---+----------------------
1/1 FORW 19 52 ROOT 1/1 PTP EDG 8000-00:30:f1:5b:37:73
1/2 DIS 0 0 DIS 1/2 NS NO 0000-00:00:00:00:00:00
1/3 DIS 0 0 DIS 1/3 NS NO 0000-00:00:00:00:00:00
1/4 DIS 0 0 DIS 1/4 NS NO 0000-00:00:00:00:00:00
1/5 DIS 0 0 DIS 1/5 NS NO 0000-00:00:00:00:00:00
1/6 DIS 0 0 DIS 1/6 NS NO 0000-00:00:00:00:00:00
1/7 DIS 0 0 DIS 1/7 NS NO 0000-00:00:00:00:00:00
1/8 DIS 0 0 DIS 1/8 NS NO 0000-00:00:00:00:00:00
1/9 DIS 0 0 DIS 1/9 NS NO 0000-00:00:00:00:00:00
1/10 DIS 0 0 DIS 1/10 NS NO 0000-00:00:00:00:00:00
1/11 DIS 0 0 DIS 1/11 NS NO 0000-00:00:00:00:00:00
1/12 DIS 0 0 DIS 1/12 NS NO 0000-00:00:00:00:00:00
-> show spantree 1 ports active
Spanning Tree Port Summary
Oper Path Desig Prim. Op Op
Port St Cost Cost Role Port Cnx Edg Desig Bridge ID
-----+----+-------+-------+----+-----+---+---+----------------------
1/1 FORW 19 52 ROOT 1/1 PTP EDG 8000-00:30:f1:5b:37:73
output definitions
Bridge The CIST instance, referred to as bridge 1 when either STP (802.1D) or
RSTP (802.1W) is the active protocol in the flat mode.
Port The slot number for the module and the physical port number or a logi-
cal port. If the slot number is 0, then the port number refers to a link
aggregate logical port number (e.g., 0/31).
Oper St The port operational state as defined by application of the Spanning
Tree Protocol. Possible port operational states include: disabled, block-
ing, learning, and forwarding.
To Next Page
Loading...
