Distributed Spanning Tree Commands
page 16-160 OmniSwitch 6250 CLI Reference Guide November 2009
Related Commands
MIB Objects
vStpInsPortTable
vStpInsPortNumber
vStpInsPortPriority
vStpInsPortState
vStpInsPortEnable
vStpInsPortPathCost
vStpInsPortDesignatedCost
vStpInsPortDesignatedBridge
vStpInsPortAdminConnectionType
vStpInsPortOperConnectionType
vStpInsPortAdminEdge
vStpInsPortAutoEdge
vStpInsPortRestrictedRole
vStpInsPortRestrictedTcn
vStpInsPortManualMode
vStpInsPortRole
vStpInsPrimaryPortNumber
vStpInsPortAdminConnectionType
vStpInsPortOperConnectionType
show spantree ports Implicit command for displaying Spanning Tree port information
for the flat mode CIST instance or a 1x1 mode VLAN instance.
show spantree cist ports Explicit command for displaying Spanning Tree port information
for a CIST instance when the switch is operating in the 1x1 or flat
Spanning Tree mode.
show spantree msti ports Explicit command for displaying Spanning Tree port information
for an MSTI when the switch is operating in the 1x1 or flat Span-
ning Tree mode.
To Next Page
Loading...
