Learned Port Security Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 19-7
Related Commands
MIB Objects
learnedPortSecurityTable
lpsMaxMacNum
port-security Enables or disables Learned Port Security (LPS) on the switch port(s).
port-security mac Configures a single authorized source MAC address for a port that
belongs to a specified VLAN.
port-security mac-range Configures a list of authorized MAC addresses by defining a range of
addresses allowed on the port.
port-security shutdown Configures the amount of time in minutes to allow source learning on all
LPS ports. Also, enables or disables the conversion of dynamic MAC
addresses to static MAC addresses on LPS ports.
port-security violation Selects the method for handling traffic that does not comply with LPS
restrictions for the specified port.
To Next Page
Loading...
