Learned Port Security Commands
page 19-16 OmniSwitch 6250 CLI Reference Guide November 2009
Related Commands
MIB Objects
learnedPortSecurityTable
lpsViolationOption
port-security Enables or disables Learned Port Security (LPS) on the switch port(s).
port-security release Releases a port that was shut down due to an LPS violation
port-security maximum Specifies the maximum number of source MAC addresses that an LPS
port(s) is allowed to learn.
port-security mac Configures a single authorized source MAC address for a port that
belongs to a specified VLAN.
port-security mac-range Configures a list of authorized MAC addresses by defining a range of
addresses allowed on the port.
port-security shutdown Configures the amount of time in minutes to allow source learning on all
LPS ports. Also, enables or disables the conversion of dynamic MAC
addresses to static MAC addresses on LPS ports.
To Next Page
Loading...
