Ethernet Port Commands
page 20-64 OmniSwitch 6250 CLI Reference Guide November 2009
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
esmConfTable
esmPortSlot
esmPortIF
esmPortMaxFloodRate
esmPortFloodMcastEnable
output definitions
Slot/Port Interface slot and port numbers.
peak rate (Mbps) Configured peak flood rate.
Enable Configuration enabled (Flood only/Multicast).
interfaces flood rate Configures the peak flood rate for an interface.
interfaces flood multicast Enables/disables flood rate limiting for multicast traffic on an
interface.
To Next Page
Loading...
