Ethernet Port Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 20-93
02/17 47 Flood only
02/18 47 Flood only
02/19 47 Flood only
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
esmConfTable
esmPortSlot
esmPortIF
esmPortMaxFloodRate
esmPortFloodMcastEnable
output definitions
Slot/Port Interface slot and port numbers.
Peak Rate (Mbps) Configured peak flood rate.
Enable Configuration enabled (Flood only/Flood Multicast/Multicast).
interfaces flood rate Configures the peak flood rate for an interface.
interfaces flood multicast Enables/disables flood multicasting on an interface.
To Next Page
Loading...
