Port Mobility Commands
page 21-30 OmniSwitch 6250 CLI Reference Guide November 2009
Release History
Release 6.6.1; command was introduced.
Related Commands
VLAN The VLAN ID number for the rule’s VLAN.
Rule The value for the type of rule defined. Switch software uses these rule
values to determine mobile port VLAN assignment. If traffic coming in
on a mobile port matches the value of a VLAN rule, then the mobile
port is dynamically assigned to that VLAN.
show vlan Displays a list of existing VLANs.
show vlan port Displays VLAN port assignments for all VLANs, a specific VLAN,
or for a specific port (mobile and fixed).
output definitions (continued)
To Next Page
Loading...
