VLAN Stacking Commands
OmniSwitch CLI Reference Guide November 2009 page 24-49
-----+----------------+---------------+---------------+-------------
10 000
-> show ethernet-service sap 1 statistics
Port CVLAN Green Yellow Red Total
-----+-------+--------------+---------------+---------------+-------------
1/3 10 - - - -
1/3 20 - - - -
1/3 50 - - - -
-> show ethernet-service service-name customer-b statistics
SAP Green Yellow Red Total
-----+----------------+---------------+---------------+-------------
2 425633 296 14101459 14527388
-> show ethernet-service sap 2 statistics
Port CVLAN Green Yellow Red Total
-----+-------+--------------+---------------+---------------+-------------
1/6 75 368412 148 11990964 12359524
1/6 80 57221 148 2110495 2167864
1/6 90 0 0 0 0
1/11 75 0 0 0 0
1/11 80 0 0 0 0
1/11 90 0 0 0 0
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaEServiceSapUniTable
alaEServiceSapUniUni
alaEServiceTable
output definitions
Service Name The name of the Ethernet service.
SAP The SAP ID associated with the service.
Port The ports associated with the specified SAP ID.
CVLAN The customer VLAN associated with the SAP port.
Green The number of packets marked green (low drop precedence).
Yellow The number of packets marked yellow (high drop precedence).
Red The number of packets marked red (packets are dropped).
Total The total number of packets marked.
ethernet-service statistics reset Resets TCM packet counters to zero.
ethernet-service sap-profile Configures a profile for a VLAN Stacking Service Access Point (SAP).
show ethernet-service sap-
profile
Displays the profile attribute configuration for VLAN Stacking SAP
profiles. Attributes include TCM rates and burst sizes.
To Next Page
Loading...
