LINK OAM Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 26-7
Related Commands
MIB Objects
dot3OamTable
dot3OamMode
efm-oam port status Enables or disables LINK OAM protocol on the specified port or on
a range of ports.
show efm-oam port Displays the status of LINK OAM on all the ports in the system,
along with other relevant information such as OAM mode, opera-
tional status and loopback status of the port.
show efm-oam configuration Displays the global LINK OAM configuration.
To Next Page
Loading...
