Alcatel-Lucent OmniSwitch 6250 - Page 982

LINK OAM Commands
page 26-14 OmniSwitch 6250 CLI Reference Guide November 2009
Related Commands
MIB Objects
dot3OamLoopbackTable
dot3OamLoopbackStatus
efm-oam port remote-loopback Specifies an action that should perform when a loopback request is
received from the peer on a port or on a range of ports.
show efm-oam port remote
detail
Displays the configuration and details of the related parameters of
the remote port.
show efm-oam configuration Displays the global LINK OAM configuration.