Keysight x-series Instruction Manual

6 Input/Output
6.4 Data Source
To recall a Recording, press the Recall hardkey (or the Recall icon in the File panel)
and press the Recording tab on the left side of the Recall panel. Then press Recall
From and choose the file you would like to recall. This will read the raw I/Q data
from the specified file and feed it to the current measurement.
After the Recall, you will see that the data on the Recording panel has changed to
describe the data in the file you just recalled:
Short Range Comms & IoT Mode User's &Programmer's Reference 2106

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)