Keysight x-series Instruction Manual

8 Trigger
8.1 Trigger
Meas Mode Preset for RF Preset for IQ
–
BTS: External 1
–
MS: Periodic Timer
Others: IMM
- MS: FRAM
Others: IMM
ACP
SA, WCDMA, LTEAFDD, LTEATDD,
MSR,SRCOMMS, 5GNR
IMM
IQ not
supported
Tx Power
SA, GSM RFBurst IMM
SPUR
SA, WCDMA, MSR, LTEAFDD, LTEATDD,
5GNR, WLAN
IMM
IQ not
supported
SEM
SA, WCDMA, MSR, LTEAFDD, LTEATDD,
SRCOMMS, 5G NR, WLAN
IMM
IQ not
supported
CDP
WCDMA IMM IMM
RHO
WCDMA IMM IMM
PCON
WCDMA IMM IMM
QPSK
WCDMA EXT1 IMM
MON All except:
SA, BASIC
IMM
IQ not
supported
WAV All except:
SA
LTEATDD:
–
BTS: External 1
–
MS: Periodic Timer
GSM/EDGE: RFBurst
All others: IMM
LTEATDD:
- BTS: EXT1
- MS: FRAM
GSM/EDGE:
IQM
All others: IMM
EVM
LTEAFDD, LTEATDD, SRCOMMS, 5GNR,
WLAN
IMM IMM
PVT
WLAN RFB
IQ not
supported
Spectral Flatness
WLAN IMM IMM
SPEC
BASIC IMM IMM
LOG Plot
PN IMM
IQ not
supported
Spot Freq
PN IMM
IQ not
supported
GMSK PVT
EDGE/GSM RFB IMM
GMSK PFER
EDGE/GSM RFB IQM
GMSK ORFS
EDGE/GSM RFB
IQ not
supported
EDGE PVT
EDGE/GSM RFB IMM
Short Range Comms & IoT Mode User's &Programmer's Reference 2324

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)