Texas Instruments CC3235 SimpleLink Series - STCURRENT Register; STCURRENT Register Field Descriptions

Register Map www.ti.com
88
SWRU543–January 2019
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
Cortex
®
-M4 Peripherals
3.3.1.4 STCURRENT Register (Offset = 18h) [reset = 0h]
STCURRENT is shown in Figure 3-4 and described in Table 3-7.
Return to Summary Table.
The STCURRENT register contains the current value of the SysTick counter.
NOTE: This register can only be accessed from privileged mode.
Figure 3-4. STCURRENT Register
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RESERVED CURRENT
R-0h R/WC-0h
LEGEND: R/W = Read/Write; R = Read only; W1toCl = Write 1 to clear bit; -n = value after reset
Table 3-7. STCURRENT Register Field Descriptions
Bit Field Type Reset Description
31-24 RESERVED R 0h
23-0 CURRENT R/WC 0h
Current Value This field contains the current value at the time the
register is accessed. No read-modify-write protection is provided, so
change with care. This register is write-clear. Writing to it with any
value clears the register. Clearing this register also clears the
COUNT bit of the STCTRL register.