EasyManua.ls Logo

Texas Instruments CC3235 SimpleLink Series - Register Bit Accessibility and Initial Condition

Texas Instruments CC3235 SimpleLink Series
799 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
36
SWRU543January 2019
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
Read This First
Preface
SWRU543January 2019
Read This First
This technical reference manual describes the modules and peripherals of the CC3235x SimpleLink™ Wi-
Fi
®
microcontroller (MCU). Each description presents the module or peripheral in a general sense. Not all
features and functions of all modules or peripherals may be present on all devices. Pin functions, internal
signal connections, and operational parameters differ from device to device. The user should consult the
device-specific data sheet for these details.
Audience
This manual is intended for system software developers, hardware designers, and application developers.
About This Manual
This document is organized into sections that correspond to each major feature; it explains the features
and functionality of each module, and it also explains how to use them. For each feature, references are
given to the documentation for the driver of the corresponding operating systems. This document does not
contain performance characteristics of the device or modules, which are gathered in the corresponding
device data sheets.
Register Bit Conventions
Table 0-1 lists each register with a key indicating the accessibility of the individual bit, and the initial
condition.
Table 0-1. Register Bit Accessibility and Initial Condition
Key Bit Accessibility
rw Read/write
r Read only
r0 Read as 0
r1 Read as 1
w Write only
w0 Write as 0
w1 Write as 1
(w) No register bit implemented; writing 1 results in a pulse. The register bit is always read as 0.
h0 Cleared by hardware
h1 Set by hardware
-0, -1 Condition after PUC
-(0), -(1) Condition after POR
-[0], -[1] Condition after BOR
-{0},-{1} Condition after Brownout
Glossary
TI Glossary This glossary lists and explains terms, acronyms, and definitions.

Table of Contents

Related product manuals