IP Commands
page 29-2 OmniSwitch 6250 CLI Reference Guide November 2009
MIB information for the IP commands is as follows:
Filename: IpForward.mib
Module: IpForward
Filename: Ip.mib
Module: Ip
Filename: AlcatelIND1Ip.mib
Module: alcatelIND1IPMIB
Filename: AlcatelIND1Iprm.mib
Module: alcatelIND1IPRMMIB
A summary of the available commands is listed here:
IP ip interface
ip router primary-address
ip router router-id
ip static-route
ip route-pref
ip default-ttl
ping
traceroute
ip directed-broadcast
ip service
show ip traffic
show ip interface
show ip route
show ip route-pref
show ip redist
show ip access-list
show ip route-map
show ip router database
show ip config
show ip protocols
show ip service
IP Route Map Redistribution ip redist
ip access-list
ip access-list address
ip route-map action
ip route-map match ip address
ip route-map match ipv6 address
ip route-map match ip-nexthop
ip route-map match ipv6-nexthop
ip route-map match tag
ip route-map match ipv4-interface
ip route-map match ipv6-interface
ip route-map match metric
ip route-map set metric
ip route-map set tag
ip route-map set ip-nexthop
ip route-map set ipv6-nexthop
show ip redist
show ip access-list
show ip route-map
To Next Page
Loading...
