IP Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 29-33
Examples
-> ip route-map route1 sequence-number 10 match ip-nexthop list1
-> no ip route-map route1 sequence-number 10 match ip-nexthop list1
-> ip route-map route1 sequence-number 10 match ip-nexthop 10.0.0.0/8
-> no ip route-map route1 sequence-number 10 match ip-nexthop 10.0.0.0/8
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaRouteMapTable
alaRouteMapIndex
alaRouteMapSequence
alaRouteMapType
alaRouteMapValue
alaRouteMapRowStatus
ip access-list Creates an access list for adding multiple IPv4 addresses to route maps.
ip route-map action Creates a route map for redistribution and sets the status of the route
map to permit or deny.
show ip route-map Displays the configured IP route maps.
To Next Page
Loading...
