Chassis Management and Monitoring Commands
page 2-58 OmniSwitch 6250 CLI Reference Guide November 2009
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaStackMgrChassisTable
alaStackMgrSlotNINumber
alaStackMgrSlotCMMNumber
alaStackMgrChasRole
alaStackMgrChasState
alaStackMgrCommandAction
alaStackMgrCommandStatus
State The current operational state of the switch:
UNKNOWN: the state of the element cannot be determined
RUNNING: element is up and running
DUP SLOT: this element has a duplicate slot number
CLR SLOT: the slot number of the element has been cleared via man-
agement command after the last reboot
OUT SLOT: the element cannot initialize because there are no slot Ids
left to be assigned
Running Mode The current mode of the switch.
Saved Mode The mode the switch will be in after a reboot. The output is based on
contents of "boot.slot.cfg" file.
stack set slot mode Changes the stacking/standalone mode of the switch.
output definitions (continued)
To Next Page
Loading...
