IP Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 29-75
Related Commands
MIB Objects
alaDoSConfig
alaDoSPortScanThreshold
ip dos scan close-port-penalty Assigns a penalty value to be added to the Denial of Service pen-
alty scan value when a TCP or UDP packet is received on a closed
port.
ip dos scan tcp open-port-
penalty
Assigns a penalty value to be added to the Denial of Service pen-
alty scan value when a TCP packet is received on an open port.
ip dos scan udp open-port-
penalty
Assigns a penalty value to be added to the Denial of Service pen-
alty scan value when a UDP packet is received on an open port.
show ip dos config Displays the configuration parameters of the DoS scan for the
switch.
To Next Page
Loading...
