IP Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 29-105
timestamp reply 14 0 enabled 0
information request(obsolete) 15 0 enabled 0
information reply(obsolete) 16 0 enabled 0
address mask request 17 0 enabled 0
address mask reply 18 0 enabled 0
Release History
Release 6.6.1; command was introduced.
Related Commands
output definitions
Name The name of the ICMP message.
Type The ICMP message type. This along with the ICMP code specify the
kind of ICMP message.
Code The ICMP message code. This along with the ICMP type specify the
kind of ICMP message.
Status Whether this message is Enabled or Disabled.
min-pkt-gap The minimum packet gap, in microseconds, for this ICMP message.
The minimum packet gap is the amount of time that must pass between
ICMP messages of like types.
icmp type Enables or disables a specific type of ICMP message, and sets the
minimum packet gap.
icmp unreachable Enables or disables ICMP messages pertaining to unreachable des-
tinations, and sets the minimum packet gap.
icmp echo Enables or disables ICMP echo messages, and sets the minimum
packet gap.
icmp timestamp Enables or disables ICMP timestamp messages, and sets the mini-
mum packet gap.
icmp addr-mask Enables or disables ICMP address mask messages, and sets the
minimum packet gap.
icmp messages Enables or disables all ICMP messages.
To Next Page
Loading...
