IPv6 Commands
page 30-60 OmniSwitch 6250 CLI Reference Guide November 2009
• Use this command multiple times with the same access list name to add multiple addresses to the exist-
ing IPv6 access list.
Examples
-> ipv6 access-list access1 address 2001::1/64 action permit
-> ipv6 access-list access1 address 2001::1/64 redist-control aggregate
-> no ipv6 access-list access1 address 2001::1/64
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaRouteMapAccessListTable
alaRouteMapAccessListIndex
alaRouteMapAccessListAddress
alaRouteMapAccessListAddressType
alaRouteMapAccessListPrefixLength
alaRouteMapAccessListAction
alaRouteMapAccessListRedistControl
alaRouteMapAccessListRowStatus
ipv6 access-list Creates an IPv6 access list that is used to specify multiple IPv6
addresses for a route map configuration.
show ipv6 access-list Displays the contents of an IPv6 access list.
To Next Page
Loading...
