DHCP Relay Commands
page 32-4 OmniSwitch 6250 CLI Reference Guide November 2009
Related Commands
MIB Objects
iphelperTable
iphelperService
iphelperForwAddr
ip helper address vlan Specifies or deletes DHCP Relay based on the VLAN of the DHCP
request.
ip helper forward delay Sets the forward delay time value. DHCP Relay will not process a client
packet unless the packet contains an elapsed boot time value that is
equal to or greater than the configured value of the forward delay time.
ip helper maximum hops Sets the maximum number of hops value to specify how many relays a
BOOTP/DHCP packet can traverse.
show ip helper Displays current DHCP Relay configuration information.
show ip helper stats Displays DHCP Relay statistics, including the number of client packets
received and transmitted to the DHCP server and packets dropped due to
forward delay time and maximum hops violations.
To Next Page
Loading...
