DHCP Relay Commands
page 32-62 OmniSwitch 6250 CLI Reference Guide November 2009
-> show ip udp relay statistics tacacs
Service Vlan Pkts Sent Pkts Recvd
---------------+--------+------------+-----------
TACACS 3 0 0
-> show ip udp relay statistics 1776
Service Vlan Pkts Sent Pkts Recvd
-------------------+--------+-----------+-----------
A UDP Protocol 18 2 2
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
iphelperxStatTable
iphelperxStatService
iphelperxStatVlan
iphelperxStatTxToServer
iphelperxStatRxFromClient
output definitions
Service The active UDP service name.
VLAN The VLAN assigned to the UDP service port that will forward traffic
destined for that port. Use the ip udp relay vlan command to configure
this value.
Pkts Sent The number of packets sent from this service port to the server.
Pkts Recvd The number of packets received by this service port from a client.
show ip udp relay service Displays current configuration for UDP services by service name or by
service port number.
show ip udp relay destination Displays the VLAN assignments to which the traffic received on the
specified UDP service port is forwarded.
To Next Page
Loading...
