QoS Policy Commands
OmniSwitch CLI Reference Guide November 2009 page 39-63
Related Commands
MIB Objects
alaQoSConditionTable
alaQoSConditionName
alaQoSConditionSourceUdpPort
alaQoSConditionSourceUdpPortEnd
alaQoSAppliedConditionTable
alaQoSAppliedConditionName
alaQoSAppliedConditionSourceUdpPort
alaQoSAppliedConditionSourceUdpPortEnd
qos apply Applies configured QoS and policy settings to the current configuration.
policy condition Creates a policy condition.
show policy condition Shows information about policy conditions configured on the switch.
To Next Page
Loading...
