Network Time Protocol Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 5-17
Bogus origin = 0,
Bad authentication = 0,
Bad dispersion = 0,
Last Event = peer changed to reachable,
output definitions
IP address The server IP address.
Host mode The host mode of this remote association.
Peer mode The peer mode of this remote association.
Prefer Whether this server is a preferred server or not. A preferred server is
used to synchronize the client before a non-preferred server.
Version The version of NTP the server is using. Versions 3 and 4 are valid.
Key The NTP server’s public key. This must be accurate and the same as the
NTP server, or the client switch will not be able to synchronize with the
NTP server. A zero (0) means there is no key entered.
Stratum The stratum of the server. The stratum number is the number of hops
from a UTC time source.
Minpoll The minimum poll time. The client will poll the server for a time update
every time this limit has been exceeded.
Maxpoll The maximum poll time.
Delay The delay received from the server in its timestamp.
Offset The offset received from the server in its timestamp.
Dispersion The dispersion value received from the server in its timestamp.
Root distance The total round trip delay (in seconds) to the primary reference source.
Precision The advertised precision of this association.
Reference IP The IP address identifying the peer’s primary reference source.
Status The peer selection and association status.
Uptime count The time period (in seconds) during which the local NTP server was
associated with the switch.
Reachability The reachability status of the peer.
Unreachable count Number of times the NTP entity was unreachable.
Stats reset count The time delay (in seconds) since the last time the local NTP server was
restarted.
Packets sent Number of packets sent.
Packets received Number of packets received.
Duplicate packets Number of duplicated packets received.
Bogus origin Number of bogus packets.
Bad authentication Number of NTP packets rejected for not meeting the authentication
standards.
Bad dispersion Number of bad dispersions.
Last Event The last event.
To Next Page
Loading...
