Alcatel-Lucent OmniSwitch 6250 - Page 2011

OmniSwitch 6250 CLI Reference Guide November 2009 page 17 AAA Commands
no vlan ipmvlan ipmvlan-id ctag {ctag | ctag1-ctag2}
vlan ipmvlan ipmvlan-id address {ip_address | ipv6_address | ipaddress1-ipaddress2 |
ipv6address1-ipv6address2}
no vlan ipmvlan ipmvlan-id address {ip_address | ipv6_address | ipaddress1-ipaddress2 |
ipv6address1-ipv6address2}
vlan ipmvlan ipmvlan-id sender-port {port slot/port[-port2
] | linkagg agg_num [-agg_num2]}
no vlan ipmvlan ipmvlan-id sender-port {port slot/port[-port2] | linkagg agg_num [-
agg_num2]}
vlan ipmvlan ipmvlan-id receiver-port {port slot/port[-port2
] | linkagg agg_num [-
agg_num2]}
no vlan ipmvlan ipmvlan-id receiver-port {port slot/port[-port2] | linkagg agg_num [-
agg_num2
]}
vlan svlan port {slot/port | agg_num} translate cvlan customer-vlan-id {ipmvlan ipmvlan-id |
svlan svlan-id}
vlan svlan port {slot/port | agg_num} cvlan customer-vlan-id no ipmvlan ipmvlan-id
show vlan ipmvlan [ipmvlan-id] c-tag
show vlan ipmvlan [ipmvlan-id] address
show vlan ipmvlan
[ipmvlan-id] port-config
show vlan ipmvlan
port-config [slot/port | agg_num]
show vlan ipmvlan port-binding [slot/port | agg_num]
AAA Commands
aaa radius-server server [host {hostname | ip_address} [hostname2 | ip_address2]] [key
secret] [retransmit retries] [timeout seconds] [auth-port auth_port] [acct-port acct_port]
no aaa radius server server
aaa tacacs+-server server [host {hostname | ip_address} {hostname2 | ip_address2}] [key
secret]
[timeout seconds] [port port]
no aaa tacacs+-server server
aaa ldap-server server_name [host {hostname | ip_address} [{hostname2 | ip_address2}]] [dn
dn_name] [password super_password] [base search_base] [retransmit retries] [timeout
seconds] [ssl | no ssl] [port port]
no aaa ldap-server server-name
aaa ace-server clear
aaa authentication {console | telnet | ftp | http | snmp | ssh | default} server1 [server2...] [local]
no aaa authentication [console | telnet | ftp | http | snmp | ssh | default]
aaa authentication {console | telnet | ftp | http | snmp | ssh} default
aaa authentication 802.1x server1 [server2] [server3] [server4]
no aaa authentication 802.1x
aaa authentication MAC server1 [server2] [server3] [server4]
no aaa authentication MAC
aaa accounting 802.1x server1 [server2...] [local]
no aaa accounting 802.1x
aaa accounting session server1 [server2...] [local]
no accounting session
aaa accounting command server1 [server2...] [local]
no accounting command
user username [password password] [expiration {day | date}] [read-only | read-write
[families... | domains...| all | none]] [no snmp | no auth | sha | md5 | sha+des | md5+des]
[end-user profile name]
no user username
password
user password-size min size
user password-expiration {day | disable}
user password-policy cannot-contain-username {enable | disable}
user password-policy min-uppercase number
user password-policy min-lowercase number
user password-policy min-digit number
user password-policy min-nonalpha number
user password-history number
user password-min-age days
user lockout-window minutes
user lockout-threshold number
user lockout-duration minutes
user {lockout | unlock}
end-user profile name [read-only [area | all]] [read-write [area | all]] [disable [area | all]]
no end-user profile name
end-user profile name vlan-range vlan_range [vlan_range2...]
end-user profile name no vlan-range vlan1 [vlan2..]
aaa user-network-profile name name vlan vlan-id
no aaa user-network-profile name name
show aaa server [server_name]
show aaa authentication
show aaa authentication 802.1x
show aaa authentication mac
show aaa authentication 802.1x
show aaa accounting
show user [username]
show user password-size
show user password-expiration
show user password-policy
show user lockout-setting
debug command-info {enable | disable}
debug end-user profile name
show end-user profile name
show aaa priv hexa [domain or family]