OmniSwitch 6250 CLI Reference Guide November 2009 page 18 802.1X Commands
802.1X Commands
802.1x slot/port [direction {both | in}] [port-control {force-authorized | force-unauthorized |
auto}] [quiet-period seconds] [tx-period seconds] [supp-timeout seconds] [server-
timeout seconds] [max-req max_req] [re-authperiod seconds] [reauthentication | no
reauthentication]
802.1x initialize slot/port
802.1x reauthenticate slot/port
802.1x slot/port
supp-polling retry retries
802.1x slot/port supplicant policy authentication [[pass] {group-mobility | vlan
vid | default-vlan | block | captive-portal}...] [[fail] {vlan vid | block | captive-portal}...]
802.1x slot/port
non-supplicant policy authentication [[pass] {group-mobility |
vlan
vid | default-vlan | block | captive-portal}] [[fail] {group-mobility | vlan vid |
default-vlan | block | captive-portal}]
802.1x slot/port
non-supplicant policy {group-mobility | vlan vid | default-vlan | block |
captive-portal}
802.1x slot/port
{supplicant | non-supplicant} policy default
802.1x slot/port captive-portal policy authentication pass {group-mobility |
vlan
vid | default-vlan | block}] [fail] {group-mobility | vlan vid | default-vlan | block}
802.1x slot/port
captive-portal session-limit time
802.1x slot/port captive-portal retry-count retries
802.1x captive-portal address ip_address
802.1x
captive-portal proxy-server-url proxy_url
show 802.1x [slot/port]
show 802.1x users [slot/port]
show 802.1x statistics [slot/port]
show 802.1x device classification policies [slot/port]
show 802.1x non-supplicant [slot/port]
show 802.1x captive-portal configuration [slot/port]
Switch Logging Commands
swlog
no swlog
swlog appid {app_id | integer} level {level | integer}
no swlog appid app_id
swlog output {console | flash | socket [ip_address]}
no swlog output {console | flash | socket [ip_address]}
swlog output flash file-size bytes
swlog clear
show log swlog
show log swlog [session session_id] [timestamp start_time [end_time]] [appid appid] [level
level]
show swlog
To Next Page
Loading...
