Session Management Commands
page 6-50 OmniSwitch 6250 CLI Reference Guide November 2009
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
sessionCliCommandLogEnable
output definitions
Command The exact syntax of the command, as entered by the user.
UserName The name of the user session that entered the command. For more
information on different user session names, refer to the user command
page, or the “Managing Switch User Accounts” chapter in the
OmniSwitch 6250 Switch Management Guide.
Date The date and time, down to the second, when the command was
entered.
IpAddr The IP address of the terminal from which the command was entered.
Result The outcome of the command entry. Options include SUCCESS and
ERROR. For erroneous command entries, the same error details pre-
sented by the switch at the time the command was entered are also dis-
played in the log file.
command-log Enables or disables command logging on the switch.
show command-log status Shows the current status of the command logging function
(i.e., enabled or disabled).
To Next Page
Loading...
