Configuration File Manager Commands
page 9-12 OmniSwitch 6250 CLI Reference Guide November 2009
Usage Guidelines
• Only current, non-default configuration settings are written to the snapshot file.
• You may enter more than one network feature in the command line. Separate each network feature with
a space and no comma. Network features may be entered in any order.
• The snapshot file is automatically placed in the root /flash directory unless otherwise specified.
Examples
-> configuration snapshot all
-> configuration snapshot new_file1 qos health aggregation
-> configuration snapshot snmp_snapshot snmp
-> configuration snapshot 802.1q
Release History
Release 6.6.1; command was introduced.
Related Commands
N/A
MIB Objects
configManager
configSnapshotFileName
configSnapshotAction
configSnapshotAllSelect
configSnapshotVlanSelect
configSnapshotSpanningTreeSelect
configSnapshotQOSSelect
configSnapshotIPSelect
configSnapshotIPMSSelect
configSnapshotAAASelect
configSnapshotSNMPSelect
configSnapshot802.1QSelect
configSnapshotLinkAggregateSelect
configSnapshotPortMirrorSelect
configSnapshotXIPSelect
configSnapshotHealthMonitorSelect
configSnapshotBootPSelect
configSnapshotBridgeSelect
configSnapshotChassisSelect
configSnapshotInterfaceSelect
configSnapshotPolicySelect
configSnapshotSessionSelect
configSnapshotSystemServiceSelect
configSnapshotWebSelect
configSnapshotRIPSelect
configSnapshotIPRMSelect
configSnapshotIPMRSelect
configSnapshotModuleSelect
configSnapshotRDPSelect
configSnapshotIPv6Select
To Next Page
Loading...
