Distributed Spanning Tree Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 16-5
Examples
-> bridge mode flat
-> bridge mode 1x1
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
vStpTable
vStpNumber
vStpMode
bridge protocol Selects the Spanning Tree protocol for the specified instance.
bridge bpdu-switching Enables the switching of Spanning Tree BPDU on a VLAN that has
Spanning Tree disabled.
show spantree Displays VLAN Spanning Tree parameter values.
To Next Page
Loading...
