Distributed Spanning Tree Commands
page 16-28 OmniSwitch 6250 CLI Reference Guide November 2009
Related Commands
MIB Objects
vStpInsTable
vStpIns1x1VlanNumber
vStpInsMode
vStpInsPriority
vStpInsBridgeAddress
bridge mode Selects a flat Spanning Tree or 1x1 (per VLAN) Spanning Tree operat-
ing mode for the switch.
bridge priority Implicit command for changing the Spanning Tree priority for the flat
mode CIST instance or a 1x1 mode VLAN instance.
bridge cist priority Explicit command for changing the Spanning Tree priority for the CIST
instance when the switch is operating in either the flat or 1x1 mode.
bridge msti priority Explicit command for changing the Spanning Tree priority for an MSTP
MSTI when the switch is operating in either the flat or 1x1 mode.
To Next Page
Loading...
