Distributed Spanning Tree Commands
page 16-44 OmniSwitch 6250 CLI Reference Guide November 2009
Related Commands
MIB Objects
vStpInsTable
vStpInsNumber
vStpInsBridgeForwardDelay
bridge mode Selects the Spanning Tree operating mode (flat or 1x1) for the switch.
bridge forward delay Implicit command for changing the Spanning Tree forward delay time
value for the flat mode CIST instance or for a 1x1 mode VLAN
instance.
bridge 1x1 forward delay Explicit command for changing the Spanning Tree forward delay time
value for a VLAN instance when the switch is operating in either the flat
or 1x1 mode.
To Next Page
Loading...
