Distributed Spanning Tree Commands
page 16-46 OmniSwitch 6250 CLI Reference Guide November 2009
Related Commands
MIB Objects
vStpInsTable
vStpIns1x1VlanNumber
vStpInsMode
vStpInsBridgeForwardDelay
bridge mode Selects the Spanning Tree operating mode (flat or 1x1) for the switch.
bridge forward delay Implicit command for changing the Spanning Tree forward delay time
value for the flat mode CIST instance or for a 1x1 mode VLAN
instance.
bridge cist forward delay Explicit command for changing the Spanning Tree forward delay time
value for the CIST instance when the switch is operating in either the
flat or 1x1 mode.
To Next Page
Loading...
