Distributed Spanning Tree Commands
page 16-122 OmniSwitch 6250 CLI Reference Guide November 2009
Related Commands
MIB Objects
vStpInsTable
vStpInsNumber
vStpInsProtocolSpecification
vStpInsMode
vStpInsPriority
vStpInsBridgeAddress
vStpInsDesignatedRoot
vStpInsRootCost
vStpInsRootPortNumber
vStpInsNextBestRootCost
vStpInsNextBestRootPortNumber
vStpInsBridgeTxHoldCount
vStpInsTopChanges
vStpInsTimeSinceTopologyChange
vStpInsMaxAge
vStpInsForwardDelay
vStpInsHelloTime
show spantree cist Explicit command for displaying the Spanning Tree bridge configu-
ration for the CIST instance regardless of which mode (1x1 or flat)
is active on the switch.
show spantree msti Explicit command for displaying the Spanning Tree bridge configu-
ration for an MSTI regardless of which mode (1x1 or flat) is active
on the switch.
show spantree 1x1 Explicit command for displaying the Spanning Tree bridge configu-
ration for a VLAN instance regardless of which mode (1x1 or flat)
is active on the switch.
To Next Page
Loading...
