Source Learning Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 18-17
Release History
Release 6.6.1; command was introduced.
Related Commands
output definitions
Permanent Address Count The number of static MAC addresses configured on the switch with a
permanent management status (MAC address is never aged out).
DeleteOnReset Address Count The number of static MAC addresses configured on the switch with a
reset management status (MAC address is deleted on the next switch
reboot).
DeleteOnTimeout Address
Count
The number of static MAC addresses configured on the switch with a
timeout management status (MAC address ages out according to the
MAC address table aging timer value).
Dynamic Learned Address
Count
The number of MAC addresses learned by the switch. These are MAC
addresses that are not statically configured addresses.
Total MAC Address In Use The total number of MAC addresses (learned and static) that are known
to the switch.
show mac-address-table Displays Source Learning MAC Address Table information.
show mac-address-table aging-
time
Displays the current aging time value for the Source Learning MAC
Address Table.
To Next Page
Loading...
