Chassis Management and Monitoring Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 2-15
Usage Guidelines
• Note that when performing an update, it is important that the correct update file is used and that the file
is located in the /flash directory on the switch. Specifying the wrong file may impact the operation of
the switch.
• A different update file is required depending on the type of switch and the type of update. The follow-
ing table provides a list of the required update files: CP - Need to verify update file names for 6250.
Examples
OS6400-> update uboot 2
OS6400-> update uboot-miniboot
OS6400-> update fpga cmm
OS6400-> update miniboot 3
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
systemServices
systemServicesArg1
systemServicesAction
OmniSwitch Update Type Update File
6250 Uboot kuboot.bin
Miniboot gminiboot.uboot
Uboot and Miniboot kuboot.bin
gminiboot.uboot
FPGA Gfpga.upgrade_kit
reload all Reloads all the NIs and CMMs in a chassis.
To Next Page
Loading...
