Ethernet Port Commands
page 20-38 OmniSwitch 6250 CLI Reference Guide November 2009
Examples
-> show interfaces 1/2
Slot/Port 1/2 :
Operational Status : up,
Last Time Link Changed : FRI DEC 27 15:10:40 ,
Number of Status Change: 1,
Type : Ethernet,
SFP/XFP : Not Present,
MAC address : 00:d0:95:b2:39:85,
BandWidth (Megabits) : 1000, Duplex : Full,
Autonegotiation : 1 [ 1000-F 100-F 100-H 10-F 10-H ],
Long Frame Size(Bytes) : 9216, Runt Size(Bytes) : 64,
Rx :
Bytes Received : 7967624, Unicast Frames : 0,
Broadcast Frames: 124186, M-cast Frames : 290,
UnderSize Frames: 0, OverSize Frames: 0,
Lost Frames : 0, Error Frames : 0,
CRC Error Frames: 0, Alignments Err : 0,
Tx :
Bytes Xmitted : 255804426, Unicast Frames : 24992,
Broadcast Frames: 3178399, M-cast Frames : 465789,
UnderSize Frames: 0, OverSize Frames: 0,
Lost Frames : 0, Collided Frames: 0,
Error Frames : 0
output definitions
Slot/Port Interface slot and port.
Operational Status Interface status (up/down).
Type Interface type (Ethernet/Fast Ethernet/Gigabit Ethernet).
MAC address Interface MAC address.
Bandwidth Bandwidth (in megabits).
Duplex Duplex mode (Half/Full/Auto).
Autonegotiation The auto negotiation settings for this interface.
Long Accept Long Frames status (enable/disable).
Runt Accept Runt Frames status (enable/disable).
Long Frame Size Long Frame Size (in Bytes).
Runt Size Runt Frame Size (in Bytes).
Bytes Received Number of Bytes received.
Rx Unicast Frames Number of unicast frames received.
Rx Broadcast Frames Number of broadcast frames received.
Rx M-cast Frames Number of multicast frames received.
Rx Undersize Frames Number of undersized frames received.
Rx Oversize Frames Number of oversized frames received.
Rx Lost Frames Number of Lost Frames received.
Rx Error Frames Number of error frames received.
Rx CRC Error Frames Number of CRC error frames received.