Ethernet Port Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 20-53
Examples
-> show interfaces 2/1 counters errors
02/01,
Alignments Errors = 6.45E13, FCS Errors = 7.65E12
IfInErrors = 6435346, IfOutErrors= 5543,
Undersize pkts = 867568, Oversize pkts= 5.98E8
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
esmConfTable
esmPortSlot
esmPortIF
ifTable
ifInErrors
ifOutErrors
alcetherStatsTable
alcetherStatsRxUndersizePkts
dot3StatsTable
dot3StatsAlignmentErrors
dot3StatsFCSErrors
dot3StatsFrameTooLong
output definitions
Slot/Port Interface slot and port number.
Alignments Errors Number of Alignments errors.
FCS Errors Number of Frame Check Sequence errors.
IfInErrors Number of received error frames.
IfOutErrors Number of transmitted error frames.
Undersize pkts Number of undersized packets.
Oversize pkts Number of oversized packets (more than 1518 octets).
show interfaces counters Displays interface counters information (e.g., unicast, broadcast,
and multi-cast packets received/transmitted).
To Next Page
Loading...
