Ethernet Port Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 20-55
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
esmConfTable
esmPortSlot
esmPortIF
alcetherStatsTable
alcetherStatsRxCollisions
dot3StatsTable
dot3StatsSingleCollisionFrames
dot3StatsMultipleCollisionFrames
dot3StatsExcessiveCollisions
Tx Single Collision Number of successfully transmitted frames for which transmission was
inhibited by one collision.
Tx Multiple Collisions Number of successfully transmitted frames for which transmission was
inhibited by multiple collisions.
Tx Excessive Retries Number of frames for which transmission fails due to excessive colli-
sions.
Rx Collisions Number of receive collisions.
Rx Single Collision Number of successfully received frames for which reception was
inhibited by one collision.
Rx Multiple Collisions Number of successfully received frames for which reception was
inhibited by multiple collisions.
Rx Excessive Retries Number of frames for which reception fails due to excessive collisions.
show interfaces Displays general interface information (e.g., hardware, MAC
address, input errors, and output errors).
output definitions (continued)
To Next Page
Loading...
