Ethernet Port Commands
page 20-76 OmniSwitch 6250 CLI Reference Guide November 2009
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
esmConfTable
esmPortCfgSlot
esmPortCfgIF
esmPortPauseSlotTime
esmPortActiveHybridType
esmHybridConfTable
esmHybridPortCfgFlow
esmHybridPortCfgCrossover
dot3PauseTable
dot3PauseSlotTime
Wait time The amount of time, in microseconds, the neighbor interface will wait
after receiving a PAUSE frame from the local interface.
Cfg-Pause The flow control setting (Tx = transmit, Rx = receive, Tx-N-Rx =
transmit and receive). Configured through the interfaces hybrid pause
command.
Cfg-Cross The user-configured cross-over setting (Auto, MDI, or MDIX). Con-
figured through the interfaces hybrid crossover command.
Hybrid Type The configured active media type for the hybrid port (F = fiber, C =
copper, NA = not applicable).
show interfaces pause Displays the interface flow control pause settings.
output definitions (continued)
To Next Page
Loading...
