Port Mobility Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 21-7
Examples
-> vlan 10 dhcp port 3/1
-> van 20 dhcp port 4/1-16
-> vlan 30 dhcp port 5/1-32 6/5-10 8/7-22
-> vlan 10 no dhcp port 3/1
-> vlan 20 no dhcp port 4/1-16
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
vDhcpPortRuleTable
vDhcpPortRuleIfIndex
vDhcpPortRuleVlanId
vDhcpPortRuleStatus
vlan dhcp mac Defines a DHCP MAC address rule for an existing VLAN. Mobile ports
that receive DHCP frames with a source MAC address that matches the
address specified by this rule are temporarily assigned to the VLAN.
vlan dhcp mac range Defines a DHCP MAC address range rule for an existing VLAN.
Mobile ports that receive DHCP frames with a source MAC address that
falls within the range specified by this rule are temporarily assigned to
the VLAN.
vlan dhcp generic Defines a generic DHCP rule for an existing VLAN. Mobile ports that
receive DHCP frames that do not match other DHCP rules are tempo-
rarily assigned to the VLAN.
show vlan Displays existing VLANs.
show vlan rules Displays rules defined for VLANs.
To Next Page
Loading...
