GVRP Commands
page 23-30 OmniSwitch 6250 CLI Reference Guide November 2009
Related Commands
MIB Objects
Dot1qportvlantable
dot1qPortGvrpLastPduOrigin
dot1qPortGvrpStatus
alaGvrpPortConfigTable
alaGvrpPortConfigRegistrarMode
alaGvrpPortConfigApplicantMode
alaGvrpPortConfigJoinTimer
alaGvrpPortConfigLeaveTimer
alaGvrpPortConfigLeaveAllTimer
alaGvrpPortConfigRestrictedRegistrationBitmap
alaGvrpPortConfigRegistrationToStaticVlan
alaGvrpPortConfigPropagateDynamicNonGvrpVlan
gvrp port Enables GVRP on a specific port or an aggregate of ports on the switch.
gvrp registration Configures the GVRP registration mode for a specific port or an aggre-
gate of ports.
gvrp applicant Configures the applicant mode of a specific port or an aggregate of ports
on the switch.
gvrp timer Configures the Join, Leave, or LeaveAll timer values for the switch
ports.
gvrp restrict-vlan-registration Restricts GVRP processing from dynamically registering the specified
VLAN(s) on the switch.
gvrp restrict-vlan-
advertisement
Restricts the advertisement of VLANs on a specific port or an aggregate
of ports.
gvrp static-vlan restrict Restricts a port from becoming a member of a statically created VLAN
or a range of VLANs.
show gvrp configuration port Displays the GVRP configuration status for all the ports.
To Next Page
Loading...
