Chassis Management and Monitoring Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 2-39
Release History
Release 6.6.1; command was introduced.
output definitions
Model Name The NI’s module name. For example, OS9-GNI-C24 indicates a twenty
four-port 10/100/1000BaseT Ethernet module.
Description A general description of the NI. For example, 24pt 10/100/1000BaseT
Mod indicates a twenty four-port 10/100/1000BaseT Ethernet module.
Part Number The Alcatel-Lucent part number for the NI.
Hardware Revision The hardware revision level for the NI.
Serial Number The Alcatel-Lucent serial number for the NI’s printed circuit board
(PCB).
Manufacture Date The date the NI was manufactured.
Firmware Version The firmware version for the NI’s ASICs.
Admin Status The current power status of the NI. Options include POWER ON or
POWER OFF.
Operational Status The operational status of the NI. Options include UP or DOWN. The
operational status can be DOWN while the power status is on, indicat-
ing a possible software issue.
Power Consumption The current power consumption for the CMM.
Power Control Checksum The current power control checksum for the corresponding NI.
MAC Address The MAC address assigned to the NI.
ASIC - Physical General information regarding the NI module’s ASICs.
CPLD - Physical General information regarding the CPLD.
UBOOT Version UBOOT version of the NI.
UBOOT-miniboot Version UBOOT-miniboot version of the NI.
POE SW Version POE software version of the NI (POE modules only).
C20L Upgd FailCount The number of failed upgrade attempts (C20L modules that have
attempted to be upgraded only).
To Next Page
Loading...
