Chassis Management and Monitoring Commands
page 2-40 OmniSwitch 6250 CLI Reference Guide November 2009
Related Commands
MIB Objects
chasEntPhysOperStatus
reload ni Reloads (i.e., reboots) a specified Network Interface (NI) module.
power ni Turns the power on or off for a specified Network Interface (NI)
module.
show module Displays the basic information for either a specified module or all mod-
ules installed in the chassis.
show module long Displays the detailed information for either a specified module or all
modules installed in the chassis.
show module status Displays the basic status information for either a specified module or all
modules installed in the chassis.
To Next Page
Loading...
