LINK OAM Commands
page 26-30 OmniSwitch 6250 CLI Reference Guide November 2009
Related Commands
MIB Objects
dot3OamTable
dot3OamAdminState
dot3OamMode
dot3OamOperStatus
dot3OamLoopbackTable
dot3OamLoopbackStatus
efm-oam multiple-pdu-count Configures the value of multiple PDU count. When multiple PDU
count is set to a specific number in case of any of the threshhold
cross events, the same event notification PDU will be transmitted
that many times towards the peer.
To Next Page
Loading...
